Skip to content 
Huasheng GPS Trackers: Port 5111 Protocol Guide
This technical overview covers the Huasheng (HS) series devices operating on Port 5111, providing essential setup data for fleet managers and installers.
Device Comparison Table
| Model | Key Application | Connectivity | Voltage Range |
|---|---|---|---|
| HS-500P | Personal / Portable | 2G/4G | 3.7V – 5V |
| HS-300V | Vehicle Monitoring | 2G/3G | 9V – 36V |
| HS-400 | Basic Tracking | 2G | 9V – 90V |
| HS-1200 | Asset / Magnetic | 2G/4G | Internal Battery |
| HS-3000G | High-End Fleet | 4G LTE | 9V – 40V |
| HS-800W | Motorcycle (IP67) | 2G | 9V – 75V |
| HS-2000C | Anti-Theft | 2G | 9V – 36V |
| HS-2000G | Standard Logistics | 2G/3G | 9V – 36V |
| HS-4000W | Industrial Heavy Duty | 4G LTE | 9V – 100V |
SMS Configuration Commands (Port 5111)
Use these commands to point your Huasheng device to your tracking server. Replace 000000 with your device password (default) and IP_OR_DOMAIN with your server address.
1. Set Server IP and Port
SERVER,000000,0,IP_OR_DOMAIN,5111,0#
2. Set APN Configuration
APN,000000,your_apn_name,apn_user,apn_password#
3. Check Device Status
STATUS# or PARAM#
Technical Wiring Diagram (Vehicle Models)
Standard 4-Wire Pinout:
- Red Wire: Power Positive (9V-36V/90V) – Connect to constant 12V/24V.
- Black Wire: Power Negative (GND) – Connect to vehicle chassis.
- Orange Wire: ACC / Ignition – Connect to ignition switch to detect engine status.
- Yellow Wire: Relay/Fuel Cut-off – Connect to the yellow wire of the relay (86) for remote immobilization.
