Skip to content 
Granit Navigator Series: Port 5113 Technical Guide
The Granit Navigator series represents a pinnacle in ruggedized telematics, specifically engineered for high-precision fleet management and industrial asset tracking. Utilizing the specialized Granit binary protocol via Port 5113, these devices (including the popular Navigator 4 and the advanced Navigator 5) offer unparalleled data stability in extreme environments. Whether you are monitoring heavy machinery or long-haul logistics, understanding the technical configuration—from wiring pinouts to SMS command structures—is essential for seamless server integration.
1. Device Comparison
| Feature | Granit-Navigator 4.14 | Granit-Navigator 5 |
|---|---|---|
| Primary Port | 5113 | 5113 |
| GNSS Receiver | GLONASS/GPS (High Sensitivity) | Multi-constellation (Enhanced) |
| Digital Inputs | Up to 8 Inputs | 10+ Inputs (Expanded) |
| Interfaces | RS-232, Analog, Pulse | RS-485, CAN-bus, RS-232 |
| Battery | Standard Internal Backup | Extended Life Li-Po |
| Application | Standard Fleet/Motorcycles | Heavy Machinery/Advanced Telematics |
2. Technical Wiring Diagram (Generic Pinout)
[ PIN ] [ COLOR ] [ FUNCTION ]
1 Red Power Supply (+9V to +36V DC)
2 Black Ground (GND)
3 Yellow Ignition (ACC) – Digital Input 1
4 Green Digital Input 2 (SOS/Panic)
5 White Analog Input (Fuel Sensor/Temp)
6 Blue Digital Output (Relay Control)
7 Orange RS-232 / CAN High
8 Brown RS-232 / CAN Low
1 Red Power Supply (+9V to +36V DC)
2 Black Ground (GND)
3 Yellow Ignition (ACC) – Digital Input 1
4 Green Digital Input 2 (SOS/Panic)
5 White Analog Input (Fuel Sensor/Temp)
6 Blue Digital Output (Relay Control)
7 Orange RS-232 / CAN High
8 Brown RS-232 / CAN Low
3. SMS Configuration Commands
Send these commands via SMS to the device’s SIM number to configure the Port 5113 connection.
# Set APN Settings:
APN,name,user,password# (e.g., APN,internet,user1,pass1#)
APN,name,user,password# (e.g., APN,internet,user1,pass1#)
# Set Server and Port 5113:
SERVER,1,domain.com,5113,0#
Note: Replace ‘domain.com’ with your tracking server IP/Host.
SERVER,1,domain.com,5113,0#
Note: Replace ‘domain.com’ with your tracking server IP/Host.
# Reboot Device:
RESET#
RESET#
# Check Current Status:
STATUS# (Returns GPS signal, Battery, and Port status)
STATUS# (Returns GPS signal, Battery, and Port status)
