Cityeasy Protocol 5088 GPS Tracker Setup & Wiring Guide

/ Supported GPS Devices / By

Cityeasy Protocol 5088 Technical Reference

The Cityeasy Protocol (ID: 5088) is a robust communication standard for GPS hardware. Below is the comprehensive technical breakdown and model comparison for all major Cityeasy devices.

1. Device Comparison Table

Model Name	Brand/Manufacturer	Protocol ID	Primary Use Case
Cityeasy 520	Cityeasy	5088	High-End Vehicle / Multi-I/O
Cityeasy 009	Cityeasy	5088	Vehicle Tracking / Engine Cut-off
Cityeasy 006	Cityeasy	5088	Personal Tracking / Pets
Cityeasy 007	Cityeasy	5088	Asset Tracking / Magnetic
Cityeasy 202	Cityeasy	5088	Advanced Fleet Management
Cityeasy 306	Cityeasy	5088	Plug & Play OBDII Tracking
Cityeasy 100	Cityeasy	5088	Basic Personal/Vehicle Tracking
Cityeasy 200	Cityeasy	5088	Standard Fleet Logistics
Cityeasy 302	Cityeasy	5088	Cargo & Container Tracking
Cityeasy 008	Cityeasy	5088	Compact Portable Tracking
Cityeasy 201	Cityeasy	5088	Vehicle Security / Overspeed Alerts

2. Technical Wiring Diagram

Standard wiring for hardwired models (009, 201, 202, 520):

[RED] —————– (PWR+) DC 9V – 36V (Constant Power)
[BLACK] —————– (GND) Vehicle Chassis Ground
[WHITE] —————– (ACC) Ignition Sense (Key ON/OFF)
[YELLOW] —————- (RELAY) Yellow wire of Relay (Fuel Cut)

Special I/O (Models 202/520):
[GREEN] —————– SOS Button Positive
[BLUE] —————– Digital Input (Door/Cargo Sensor)

3. SMS Configuration Commands

Use these commands to point your device to a tracking server. Default password: 123456

Function	SMS Command	Action
Set Server IP	adminip123456 [IP] [Port]	Configures the destination server
Set APN	apn123456 [APN_Name]	Configures mobile data network
Set Interval	upload123456 30	Sets data upload to 30 seconds
Restart	rst	Reboots the hardware

Important: Ensure your SIM card has an active data plan and the PIN code is disabled before installation.